AM 441
Analog Mix
- 4 analog inputs (±10 V DC/16 bits) or potentiometer inputs (0-100 %/16 bits)
- 4 analog outputs (±10 V DC/12 bits)
- 1 reference output (+10 V DC/10 or 16.7 mA)
For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
Analog Inputs |
|
| Type |
±10 V DC resp. potentiometer 0-100 % |
| Number |
4 |
| Resolution |
16 bits |
| Measurement range |
-10 V ... +10 V or 0 ... 100 % (potentiometer) |
| Measurement precision |
±0.3 % of maximum measurement value or ±0.35 % of the maximum value |
| Conversion time for all channels |
Speed mode: 200 µs |
| Cable break monitor |
Yes |
| Hardware filter |
typically 1 kHz, low pass 3rd order |
| Software filter |
configurable, low pass 1st order |
Analog Outputs |
|
| Type |
standard |
| Number |
4 |
| Output range |
-10 V ... +10 V |
| Resolution |
12 bits |
| Refresh time for all channels |
≥ 500 μs (corresponds to the S-DIAS cyclic time) |
| Output voltage capacity |
> 5 kΩ |
| Settling time |
50 µs (63 % of the end value) 100 µs (86 % of the end value) 250 µs (99 % of the end value) |
| Accuracy |
±0.5 % of maximum output value |
Reference Output |
|
| Number |
1 |
| Reference voltage |
+10 V DC |
| Allowable output current |
maximum 10 mA (< HW version 3.5), maximum 16.7 mA (≥ HW version 3.5) |
| Short-circuit proof, current limited |
Yes |
| Accuracy |
±0.5 % |
Mechanical Features |
|
| Dimensions |
12.5 x 104 x 72 mm (W x H x D) |
| Protection type |
IP20 |
Article Number/Certification |
|
| Article number |
20-017-441 |
| Standardization/certification |
UL 508 (E247993) |
pdf | 144 KB
pdf | 1.1 MB
zip | 505 KB
pdf | 303 KB