DC 061-Z1 - Regen resistor
- For DC 061-1 & DC 062
- 15 Ohm, 100 Watt
DC 101
Servo Motor Output Stage
- +48 V DC, 10 A continuous current and 20 A peak current
- Resolver input for positioning feedback (12 bits)
- 2-channel enable input for STO Safe Torque Off (SIL 3/PL e, Cat. 4)
- Holding brake
- External regen resistor optional
- For controlling a synchronous servo motor
For the DC 101, AKM low-voltage servo motors are available. For simple control cabinet integration of the S-DIAS system, EPLAN Macros are provided.
Performance Data |
|
| Supply voltage |
+24 V DC (+18-30 V DC) |
| Voltage monitor |
Yes |
Digital Inputs |
|
| Type |
Enable |
| Number |
2 |
| Input voltage |
+24 V DC (+18-30 V DC) |
| Input current |
3 mA at +24 V DC |
| Input delay |
typically 0.5 ms |
Resolver |
|
| Number |
1 |
| Resolution |
12 bits |
| Output voltage |
typically 7 V rms |
| Output current |
200 mA |
| Output frequency |
8 kHz |
Motor Driver |
|
| Type |
brushless, 4-quadrant regulator with position setting |
| Max. continuous current |
10 A |
| Max. peak current (10 sec) |
20 A |
Holding Brake |
|
| Output voltage |
+24 V DC |
| Max. continuous current |
500 mA |
| Short-circuit protection |
Yes |
Regen Resistor |
|
| Type |
external power resistor |
| Output |
GND-schaltend |
| Max. Current |
10 A |
| Short-circuit protection |
Yes |
Mechanical Features |
|
| Dimensions |
25 x 104 x 72 mm (W x H x D) |
| Protection type |
IP20 |
Article Number/Certification |
|
| Article number |
20-014-101 |
pdf | 120 KB
pdf | 1.7 MB
pdf | 9.4 MB
pdf | 737 KB
