NC 100
Position Recording
- 1 incremental encoder
- Optional with TTL or RS422 signal (16 bits)
- Encoder power supply +5 V DC
- 4 digital inputs (+24 V DC/3.7 mA/10 µs)
- 4 digital outputs (+24 V DC/2 A)
For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
Performance Data |
|
| Supply voltage |
+24 V DC (+18-30 V DC) |
Digital Inputs |
|
| Type |
standard |
| Number |
4 |
| Input voltage |
+24 V DC (+18-30 V DC) |
| Input current |
3.7 mA at +24 V DC |
| Input delay |
typically 10 µs |
Digital Outputs |
|
| Type |
standard |
| Number |
4 |
| Short-circuit proof, current limited |
Yes |
| Max. load current/channel |
2 A |
| Max. total current |
6 A |
| Output voltage |
typically +24 V DC |
Incremental Encoder Input |
|
| Number |
1 |
| Input signals |
Incremental encoder signals RS422 (A, /A, B, /B, R, /R) RS422-signal (120 Ω termination) Incremental encoder signal TTL (A, B, R) TTL-signal (1200 Ω Pull-Up) |
| Input frequency |
adjustable via software, maximum value of input frequency between 125 Hz and 125 kHz |
| Counter frequency |
maximum 500 kHz |
| Resolution |
16 bits |
| Signal analysis |
4-port |
| Power supply |
+5 V DC/0.2 A short-circuit proof |
Mechanical Features |
|
| Dimensions |
12.5 x 104 x 72 mm (W x H x D) |
| Protection type |
IP20 |
Article Number/Certification |
|
| Article number |
20-011-100 |
| Standardization/certification |
UL 508 (E247993) |
pdf | 117 KB
pdf | 1.1 MB
zip | 506 KB
pdf | 468 KB