SCP 111 - Safety CPU Module
- Safety Controller
- 1x USB Device
- MicroSD slot
- SIL 3/PL e, Cat. 4
Safety
Fully integrated or stand-alone
Thin, flexible and cost-optimized – that is the S-DIAS Safety system. The modular Safety solution for the DIN rail consists of a Safety controller (SCP), which monitors or controls the application and the corresponding Safe I/O modules.
Products for S-DIAS Safety
SDI 101 - Safety Digital Input
- 10 safe digital inputs
- Cross-circuit detection
- SIL 3/PL e, Cat. 4
STO 081 - Safety Digital Output
- 8 safe digital outputs
- SIL 3/PL e, Cat. 4
SDM 081 - Safety Digital Mix
- 6 safe digital inputs
- 2 safe digital outputs
- Cross-circuit detection
- SIL 3/PL e, Cat. 4
SNC 021 - Safety SNC Incremental Encoder
- 2 Incremental encoder inputs
- Cross-circuit detection
- SIL 3/PL e, Cat. 4
SRO 021 - Safety Relay Output
- 2 safe 30VDC relay outputs
- Closing (NO)
- SIL 3/PL e, Cat. 4
SRO 022 - Safety Relay Output
- 2 safe 230 VAC relay outputs
- Closing (NO)
- SIL 3/PL e, Cat. 4
SSI 021 - Safety SSI Absolute Value Encoder
- 2 SSI absolute encoder inputs
- Monitoring of the parameter limits
- SIL 3/PL e, Kat. 4
SIB 061 - Safety Input Box
- 6 safe digital inputs
- Cross-circuit detection
- SIL 3/PL e, Cat. 4
- For decentralized mounting
S-DIAS Safety – Hot Facts
The TÜV-certified Safety system is fully integrated into the SIGMATEK control system , but can also be used as a stand-alone solution. Existing machines and equipment can therefore be gradually equipped with Safety functions.
- Modern: designed for the highest Safety Requirements – SIL 3/PL e, Cat.4
- Compact: module dimensions of only 12.5 x 104 x 72 mm (W x H x D) - Safety PLC and I/Os
- Flexible: customize to individual requirements with modular configuration
- Efficient: minimal wiring
pdf | 483 KB
pdf | 4.3 MB