Found 279 results for  io live

Products

IIO 041 - SDCI Master

  • 4x SDCI ports
  • 4 digital inputs
    (+24 V DC/3,7 mA)
  • Input delay: 0.5 ms

IPN 021-1 - Profinet I/O Slave

  • 1x Profinet Slave I/O In
  • 1x Profinet Slave I/O Out
  • Identification parameters configurable

IPN 021 - Profinet I/O Slave

  • 1x Profinet Slave I/O In
  • 1x Profinet Slave I/O Out

IO 011 - Multi I/O Module

  • 6 digital inputs
    (+24 V DC/3.7 mA)
  • Input delay: 0.5 ms
  • 8 digital short circuit proof outputs (+24 V DC/0.5 A / backreadable)
  • 1 analog input
    (±10 V DC/16 bits)
  • 1 analog current input
    (0-20 mA resp. 4-20 mA/
    16 bits)

MSR 311 - I/O Module

  • Digital I/O module
  • 24 digital outputs (back-readable)

IO 011S - Smart Multi I/O Module

  • 6 digital inputs
    (+24 V DC/3.5 mA)
  • Input delay: 1 µs
  • 8 digital short circuit proof outputs (+24 V DC/0.5 A / backreadable)
  • 1 analog input
    (±10 V DC/16 bits)
  • 1 analog current input
    (0-20 mA resp. 4-20 mA/
    16 bits)

CAT-5 Cables – Flexible-Mini - VARAN Cable for Mini I/O

  • For specific system cable
  • 4-pin, 1x4xAWG26/7
  • 100 meter ring
  • Double shielded

PVDM 087 - Digital IP67 Mixed Module

  • 4 digital inputs
  • 4 digital outputs (back-readable)
  • 1x VARAN In
  • 1x VARAN Out

PVDM 086 - Digital IP67 Mixed Module

  • 8 digital outputs (back-readable)
  • 1x VARAN In
  • 1x VARAN Out

PVAI 011 - DMS IP65 Module

  • 1 strain gauge input
  • 1x VARAN In

AI 0812 - Analog Input

  • 8 analog PT1000/KTY inputs
    (16 bits)
  • Measurement range -50
    to +850 °C

DC 102 - Servo Motor Output Stage

  • +48 V DC, 10 A continuous /
    20 A peak current
  • 1 incremental encoder input (16 bits)
  • 1 STO (2-channel enable input)
  • Controls synchronous servo motor

SR 012 - DC Motor Output Stage

  • +50 V DC/0-5 A
  • 2 enable inputs +24 V/
    3 mA/0.5 ms
  • 4 digital inputs +24 V/
    3.7 mA/5 ms
  • 1 digital output +24 V/0.2 A
  • Controls DC brush motors

ST 151 - Stepper Motor Output Stage

  • 50 V DC, 5 A
  • 1 brake chopper
  • 1 incremental encoder input
  • 1 STO (2-channel Enable input)
  • 2 latch / digital inputs

ST 011 - Stepper Module

  • 1 frequency output
  • 1 incremental encoder input
  • 2 digital in and outputs each
  • Controls drive power components

DC 101 - Servo Motor Output Stage

  • +48 V DC, 10 A continuous /
    20 A peak current
  • 1 resolver input (12 bits)
  • 1 STO (2-channel enable input)
  • Controls synchronous servo motor

DC 061-1 - Servo Motor Output Stage

  • +48 V DC, 6 A continuous /
    15 A peak current
  • 1 resolver input (12 bits)
  • 1 STO (2-channel enable input)
  • Controls synchronous servo motor

SR 011 - DC Motor Output Stage

  • +50 V DC, 5 A
  • 1 incremental encoder input
  • 2 enable inputs +24 V/
    3 mA/0.5 ms
  • 1 digital output +24 V/0.5 A
  • Controls DC brush motors

DC 062 - Servo Motor Output Stage

  • +48 V DC, 6 A continuous /
    15 A peak current
  • 1 incremental encoder input (16 bits)
  • 1 STO (2-channel enable input)
  • Controls synchronous servo motor

SR 022 - Current Controller

  • DC motor current controller
  • +12-30 V DC, 0-3.5 A
  • 1 incremental encoder input
  • 1 digital input +5 V
  • 2 digital inputs +24 V

SR 020 - Current Controller

  • DC motor current controller
  • +12-30 V DC, 0-3.5 A
  • Power LED drive

AI 046 - Analog Input

  • 4 analog inputs (18 bits)
  • 2 adjustable measurement ranges ±11 V or ±1.1 V

AI 043 - Analog Input

  • 4 analog inputs (16 bits) for resistance or temperature
  • 5 resistance measuring ranges from 0-5000 Ω
  • Supported temperature sensors: PT100/PT1000/NI100/NI1000/diverse KTY

DM 167 - Digital Mix

  • 8 digital inputs
    (+24 V DC/3.7 mA)
  • Delay time: 5 ms
  • 8 digital outputs
    (+24 V DC/1.7 A)
  • I/Os seperated by optic couplers

VDM 086 - VARAN Digital Mix

  • 1x VARAN In
  • 1x VARAN Out
  • 8 digital outputs (back-readable)

DM 162 - Digital Mix

  • 8 digital inputs
    (+24 V DC/3.7 mA)
  • 4 of which counter function/time measurement (+24 V DC/3.7 mA)
  • Delay time: 5 ms or 1 µs
  • 8 digital outputs
    (+24 V DC/0.5 A)

DM 161 - Digital Mix

  • 8 digital inputs
    (+24 V DC/3.7 mA)
  • Delay time: 5 ms
  • 8 digital outputs
    (+24 V DC/0.5 A)

DM 046 - Digital Mix

  • 4 digital outputs, back-readable (+24 V DC/1,7 A)
  • Usage as input
    (+24 V DC/3.7 mA)
  • Delay time as input: 0.5 ms

DM 108 - Digital Mix

  • Digital Mixed Module
  • 4x digital inputs
    (+24 V/3.7 mA)
  • 4x short circuit proof digital outputs
    (+24 V/0.5 A)
  • 5 ms input delay

DM 081 - Digital Mix

  • 4 digital inputs
    (+24 V DC/3.7 mA)
  • Delay time: 5 ms
  • 4 digital outputs
    (+24 V DC/0.5 A)

RO 051 - Relay Output

  • 5 relay outputs
  • Changeover contacts
  • +24 V DC, 6 A or +115 V AC, 6 A

PW 022 - PWM Module

  • 2 PWM outputs
  • For pulse width modulation
  • Adjustable frequency

PW 161 - PWM Module

  • 16 digital outputs
  • For pulse width modulation

TO 161 - Digital Output

  • 16 digital outputs
    (+24 V DC/0,5 A)

RO 041 - Relay Output

  • 4 relay outputs
  • Normally open contacts
  • +24 V DC, 6 A or +230 V AC, 6 A

TO 081 - Digital Output

  • 8 digital outputs
    (+24 V DC/0,5 A)

TO 127 - Digital Output

  • 12 digital outputs
    (+24 V DC/1,7 A)
  • Separated by optic couplers

DI 169 - Digital Input with Counter Function

  • 16 digital counter inputs
    (GND-switching/2.5 mA)
  • Delay time: 50 µs
  • Ground switching
  • Flow rate counting

DI 205 - Digital Input

  • 20 digital inputs
    (GND-switching/3 mA)
  • Ground-switching
  • Delay time: 5 ms

DI 204 - Digital Input with Incremental Encoder

  • 2 incremental encoders with TTL signal (+5 V DC/3.7 mA)
  • Delay time: 10 µs
  • 14 digital inputs
    (+24 V DC/1.5 mA)
  • Delay time: 0.5 ms

DI 203 - Digital Input

  • 20 digital inputs
    (+24 V DC/3,7 mA)
  • Delay time: 0.5 ms

DI 202 - Digital Input with Counter Function

  • 4 digital counter inputs
    (+24 V DC/3.7 mA)
  • Delay time: 10 µs
  • 16 digital inputs
    (+24 V DC/3.7 mA)
  • Delay time: 0.5 ms

DI 160 - Digital Input

  • 16 digital inputs
    (+24 V DC/3,7 mA)
  • Delay time: 5 ms

SRO 022 - Safety Relay Output

  • 2 safe relay outputs
    (max. +230 V AC/6 A)
  • Closing (NO)
  • SIL 3/PL e, Cat. 4

SAI 041 - Safety Analog Input Module Current

  • 4 safe analog current inputs
  • Measurement range 4-20 mA
  • SIL 3/PL e, Cat. 4

SIB 061 - Safety Input Box

  • 6 safe digital inputs
    (+24 V DC/3 mA/0.5 ms)
  • Cross-circuit detection
  • SIL 3/PL e, Cat. 4
  • For decentralized mounting

SNC 021 - Safety SNC Incremental Encoder

  • 2 Incremental encoder inputs
    (up to 12 bits)
  • Cross-circuit detection
  • SIL 3/PL e, Cat. 4

SSI 021 - Safety SSI Absolute Value Encoder

  • 2 SSI absolute encoder inputs
    (up to 32 bits)
  • Monitoring of the parameter limits
  • SIL 3/PL e, Cat. 4

STO 081 - Safety Digital Output

  • 8 safe digital outputs
    (+24 V DC/2 A)
  • SIL 3/PL e, Cat. 4

SRO 021 - Safety Relay Output

  • 2 safe relay outputs
    (max. +30 V DC/6 A)
  • Closing (NO)
  • SIL 3/PL e, Cat. 4

SDM 081 - Safety Digital Mix

  • 6 safe digital inputs
    (+24 V DC/3 mA/0.5 ms)
  • 2 safe digital outputs
    (+24 V DC/2 A)
  • Cross-circuit detection
  • SIL 3/PL e, Cat. 4

SDI 101 - Safety Digital Input

  • 10 safe digital inputs
    (+24 V DC/3 mA/0.5 ms)
  • Cross-circuit detection
  • SIL 3/PL e, Cat. 4

SCP 211 - Safety CPU Module

  • Safety Controller
  • Flash: 1 Mbyte
  • SRAM: 500 kbytes
  • SIL 3/PL e, Cat. 4

SCP 111 - Safety CPU Module

  • Safety Controller
  • Flash: 224 kbytes
  • SRAM: 24 kbytes
  • SIL 3/PL e, Cat. 4

EZ 122 - Digital Output

  • 12 digital outputs
    (+24 V DC/100 mA)
  • Euromap interface

RC 001 - RealTimeClock Module

  • Real-time clock
  • Lithium battery

PSB 001 - Power Boost Module

  • Expansion Module

EZ 102 - Digital Output

  • 10 digital outputs
    (+24 V DC/100 mA)
  • Euromap interface

BL 011 - Blind Module

  • Place holder
  • Active module on the S-DIAS bus

CO 041 - Current Output

  • 4 current-controlled outputs/pulse outputs
  • 4 digital inputs +5 V

KL 181 - Potential Distributor Module +24 V

  • Potential distribution
  • 18x +24 V DC

Downloads

EU Declaration of Conformity IO 011 PDF | 120 KB Download
X-DIAS I/O system PDF | 326 KB Download
Documentation IO 011 PDF | 1.1 MB Download
Documentation IO 011S PDF | 1.6 MB Download
Product sheet IO 011S PDF | 151 KB Download
IO 011S - © SIGMATEK JPG | 227 KB Download
Product sheet IO 011 PDF | 131 KB Download
Press photo IO 011 - © SIGMATEK JPG | 1.5 MB Download
STEP File IO 011 ZIP | 505 KB Download
Documentation Mini I/O Connector Set PDF | 1.1 MB Download
Highest I/O packing density PDF | 311 KB Download
S-DIAS: Many I/Os in small room PDF | 1.2 MB Download
More I/Os in less room PDF | 236 KB Download
Press photo DIAS I/O module DIO 014 JPG | 2.4 MB Download
Press photo S-DIAS I/O system JPG | 1.7 MB Download
Press photo VARAN I/O module VDM 086 JPG | 745 KB Download
Press photoIP67 VARAN I/O module JPG | 1.1 MB Download

News

Experience our Software Tools live at the SPS

21/10/2022 Get to know our modern software tools at the SPS 2022. In our live demonstrations at the SIGMATEK exhibition stand ...

read more
Analog, digital, versatile – the smart IO 011S

26/09/2018 The IO 011S mixed module from the S-DIAS series is a true multi-talent with 14 digital in- and outputs as well as two ... 

read more
The IO 011: A True Multi-talent

09/01/2017 The IO 011 enhances the S-DIAS family with a mixed module. Within a width of only 12.5 mm, 14 digital I/Os as well as 2 analog inputs open a...

read more
DIAS I/O Module DIO 014: A Real Multi-talent

11/06/2012 The new I/O module from the DIAS series, the DIO 014, is a multitalent. It has eight digital short circuit-protected outputs...

read more
Digital I/O Module in IP67 Protection: The PVDM 087

17/04/2013 The I/O series P-DIAS, designed for rugged industrial environments, has a new addition: The digital mixed I/O module in IP67 protection...

read more
S-DIAS Series Continues to Grow with Many New I/O Modules

10/10/2013 In terms of module diversity, a lot happening with the new S-DIAS I/O system, in addition to the digital input and output modules...

read more
Intelligence for the S-DIAS I/O System: The CP 111

04/11/2013 The super compact S-DIAS I/O generation from SIGMATEK was expanded with a matching CPU in mini format: the CP 111. Within...

read more
The SDM 081 Unifies Safety I/Os in one Module

21/05/2015 The SDM 081 expands the S-DIAS series with a digital mixed module. By combining six safe inputs (0.5 ms) and two short-circuit proof...

read more

General content

S-DIAS

… S-DIAS Control and I/O system in pocket format S-DIAS combines [...] channels are packed into one I/O module. The right DIN rail module is available for any automation task [...] -DIAS I/O modules, significant space can be saved in the control cabinet. Electronics,...

read more
I/O Systems

… I/O Systems For various requirements The SIGMATEK I/O Systems open [...] is available for any task and function, so that you can perfectly tune the I/O system to your machine concept [...] transmission The ...

read more
X-DIAS

… X-DIAS One I/O Electronic with X Possibilities The new X-DIAS input [...] . The classic approach As a standard I/O system with DIN rail mounting and front-side, module [...] In all variants, the...

read more
Special Functions

… Special Functions S-DIAS is equipped for any task The super compact S-DIAS series is much more than an I/O system. In addition to digital and analog in and output cards, the series includes function modules for various automation tasks: control, Safety,...

read more
Interfaces & Splitters

… The super compact S-DIAS series is much more than an I/O system. In addition to digital and analog [...] IPN 021 - Profinet I...

read more
Measuring Technology

… Measurement Technology Measuring in S-DIAS format The super compact S-DIAS series is much more than an I/O system. In addition to digital and analog in and output cards, the series includes function modules for various automation tasks: control, Safety,...

read more
P-DIAS

… P-DIAS For use directly on the machine The P-DIAS modules expand the family of systems in the IP67-protected area and are optimized for use in harsh environmental condi

read more
VARAN Cables

… Mini I/O to Mini I/O - Drag Chain - VARAN Cable 2x Mini I/O [...] ...

read more
Cables

… Mini I/O to Mini I/O - Drag Chain - VARAN Cable 2x Mini I/O...

read more
Cable

… Mini I/O to Mini I/O - Drag Chain - VARAN Cable 2x Mini I/O...

read more
VARAN Cables

… Mini I/O to Mini I/O - Drag Chain - VARAN Cable 2x Mini I/O [...] ...

read more
VARAN Cable

… Mini I/O to Mini I/O - Drag Chain - VARAN Cable 2x Mini I/O [...] ...

read more
CPU & Bus Connection

… The super compact S-DIAS series is much more than an I/O system. In addition to digital and analog [...] CP 102 - CPU Module ...

read more
Analog Input

… Analog Input High functionality compactly packaged The super compact S-DIAS series is much more than an I/O system. In addition to digital and analog in and output cards, the series includes function modules for various automation tasks: control, Safety,...

read more
Displaying results 1 to 100 of 279.
Contact

We look forward to your inquiry!

Tell us your concerns and we will contact you as soon as possible.

Support hotline
Locations
Fairs